BCBXH - HE-104-2 ASSEMBLY CEMENT PART B
- MSDS: BCBXH
- Manufacturer: EASTMAN KODAK COMPANY
- Product Name: HE-104-2 ASSEMBLY CEMENT PART B
- National Stock Number: 6750-00K000971
Product Identification
Product ID:HE-104-2 ASSEMBLY CEMENT PART B
MSDS Date:01/01/1985
FSC:6750
NIIN:00K000971
MSDS Number: BCBXH
Responsible Party
Emergency Phone: 716-722-5151
Cage: 19139
Contractor
Telephone: 716-722-5151/(800) 242-2424
Cage: 19139
Ingredients
POLYAMIDE RESIN
Fraction By Weight: 80.0%
NON-AQUEOUS SOLUTION,HAZARD UNKNOWN,UNIDENTIFIED
Fraction By Weight: 20.0%
Hazards
Effects of Overexposure:INH:VAP IRRIT;EYES:IRRITATION ON
CONTCT;SKIN:PROLNGD/REPEATD CONTCT CAUSES IRRIT/ALLERGIC REACTION.
First Aid
First Aid:INH:REMOVE FROM EXPOSURE.GIVE CPR/OXY IF NEEDED & GET MED
ATTN;EYES:FLUSH IMMED W/WATER FOR AT LEAST 15 MIN.GET MED
HELP;SKIN:FLUSH IMMED W/PLENTY OF WATER FOR 15 MIN.FOR BURNS GET
MED ATTN.
Fire Fighting
Flash Point:332F SETAFLASH
Lower Limits:UNK
Upper Limits:UNK
Extinguishing Media:CO*2,DRY CHEM,FOAM
Fire Fighting Procedures:USE SELF-CONTND BRTHG APP;COOL EXPSD CONT
W/WATER SPRAY.
Unusual Fire/Explosion Hazard:NONE KNOWN
Accidental Release
Spill Release Procedures:USE PROTECTV/SAFETY EQUIP.STOP LEAK W/O
RISK.PER MFR,ABSORB W/RAGS,PAPER TOWELS OR A NON-COMBUSTIBLE
ABSORBENT & PLACE ABSORBENT IN A CLOSED CONTNR & REMOVE TO OUTSIDE
OF BLDG UNTIL IT CAN BE DESTROYE D PROPERLY.
Handling
Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED
AREA.KEEP CONTNRS TIGHTLY CLOSED.PROTECT CONTNRS FROM PHYSICAL
DAMAGE.
Other Precautions:AVOID PROLONGED/REPEATED CONTACT W/PRODUCT.REMOVE &
WASH CONTAMINATED CLOTHING.WASH HANDS AFTER USE.
Exposure Controls
Respiratory Protection:NONE REQD IN NORMAL CONDITIONS.
Ventilation:MECHANICAL(GEN)/LOCAL EXHAUST
Protective Gloves:IMPERVIOUS/RUBR
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:AS NECESSARY TO PREVENT SKIN CONTACT.
Supplemental Safety and Health
MSDS FM MFR DTD:3/19/79.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:>332F(167C)
Vapor Pres:UNK
Vapor Density:UNK
Spec Gravity:1.00
Solubility in Water:NEGLIGIBLE
Appearance and Odor:STRAW-COLORED LIQUID,VEGETABLE ODOR
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
PER MFR,AVOID CONTACT W/OXIDIZERS.
Hazardous Decomposition Products:BURNING/THERMAL DECOMPOSITION MAY
PRODUCE CO OR CO*2.
Disposal
Waste Disposal Methods:KEEP IN COVERED CONTNRS PENDING
DISPOSAL;INCINERATE ABSORBENT.THE INCINERATOR INSTALLATION SHOULD
COMPLY W/ALL APPLICABLE FEDERAL,STATE AND LOCAL LAWS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.